2020. 2. 8. 22:08ㆍ카테고리 없음
DLP DESIGN USB Interface Products DLP Design's USB Interface products provide a high-speed, hot-swappable, user-friendly connection between your electronic device and a host PC. The USB interface will provide up to 500mA at 5 volts of power for your electronics. Table 1 - DLP-USB232M PINOUT DESCRIPTION Pin# Description 1 BOARD ID (Out) Identifies the board as either a DLP-USB245M or DLP-USB232M. High for DLP- USB232M and low for DLP-USB245M. 2 Ground 3 RESET# (In) Can be used by an external device to reset the FT245BM. The DLP-USB232M -G2 is a low cost integrated module featuring FTDI's FT232BM 2nd generation USB. The DLP-USB232M-G2 plugs into a standard 24-pin 0.6in wide DIP socket. ECommerce Shopping Cart Software by Miva Merchant.
The DLP-USB1232H uses FTDI's 5TH generation FT2232H silicon with a tiny footprint and standard 18-pin DIP mounting. The DLP-USB245M uses FTDI's FT245BL 2ND generation USB FIFO and offers a simple, lead-free solution for interfacing ASIC/MCU/FPGA/DSP based designs to a host computer via USB. Features include an easy to use FIFO-like interface and a data transfer rate of up to 8 million bits per second. The DLP-USB232M uses FTDI's 2ND generation FT232BL (lead-free) USB UART and is the ideal solution for upgrading legacy RS232 designs to USB. The DLP-USB245R uses FTDI's 4TH generation FT245RL USB-FIFO silicon with a tiny footprint and standard 18-pin DIP mounting. The DLP-USB232R uses FTDI's 4TH generation FT232RL USB-UART silicon with a tiny footprint and standard 18-pin DIP mounting. The DLP-TXRX-G lead-free module is designed to easily connect a microcontroller/DSP/FPGA/etc to a host PC; or upgrade a legacy RS232C device to USB with minimal design effort.
New Low Price - $20.00. The DLP-TH1 is a low cost, lead free, USB-based digital temperature and humidity sensor.
Dlp Usb232m Driver For Mac
Now you can easily monitor temperature, humidity and dew point via your PC's USB port without needing any other power source. Windows software provided free lets you chart results to the PC screen and log data to your hard drive, and features email notification when temperature and humidity readings exceed alarm levels. The DLP-UT1 is a low cost, USB-based digital temperature sensor used for monitoring temperature via your PC's USB port. Use HyperTerminal or your own custom software to read the temperature data via Virtual COM ports that make the UT1 appear as though it is connected to the PC via an RS232 port. ONLY $29.95!